Happy Iron

 Maintaining a happy iron usually takes a little effort. 

I never put water in any of my irons. I use a spritzer whenever I need to dampen my fabric. But as I was re-reading the directions for cleaning my iron I came upon this little hint -

Rowenta irons are designed to be used with regular tap water (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water. Never use 100% pure distilled water since this can cause the iron to spit and leak.

There are many types of household water softeners. Many of them are perfectly acceptable for use in an iron. HOWEVER, some types of softeners, particularly those that use chemicals such as salt, can cause the iron to leak or spit during use. If you experience this type of problem, we recommend that you try using inexpensive bottled spring water. NEVER USE 100% PURE DISTILLED WATER. Once you have changed water it will take several uses to correct the problem.

So just a word to the wise. These are suggestions from the Rowenta cleaning kit, but it may be applicable to other brands as well.

I hope this will make for some Happy Quilting :-)